Project Description

  • Welded plate heat exchanger-01
  • welded heat exchanger construction
Model Number Full-Welded Plate Heat Exchanger
Structure Plate Heat Exchanger
Liquid Flow Rate 0.5m/s
Maximum Working Pressure 2.0 Mpa
Plate Thickness 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1mm
Plate Material SS304,316L,Titanium,AlloyC276,Nickel, 254SMO,C2000
Plate Theta Low theta and high theta
Plate Hole 0 hole, 1 hole, 2 holes, 3 holes, 4holes
Gasket Material NBR, HNBR, EPDM, Vitom
Gasket Type Without glued, glued
Unit Type Gasket plate heat exchanger unit
They can replace and mix with original plate

Related Products