APV Gaskets and Plates
BES supplies replacement gaskets and plates for APV plate heat exchangers. APV Model List as below.
| APV PLATES AND GASKETS MODEL LIST | |||||||
| APV SR1 | APV SR1 Clip | APV SR-2 | APV SR-3 | APV SR6AA | APV SR6AG | APV SR9 | PV Pasilac M92 (Tipo 1730) |
| APV SR23 | APV SR23PV | APV SR14AD | APV SR14AH | APV SR14AN | APV SR14AP | APV R5 Clip | APV Pasilac M107 (Tipo 1736 |
| APV R4-R405 | APV R8GI | APV A085 | APV TR9AV | APV B063 | APV Pasilac T4 | APV Pasilac T4 Clip | APV Pasilac T4 Clip |
| APV Q030D | APV Q055D | APV Q080D | APV R5 | APV Pasilac R55 | APV Pasilac N35 Clip | APV Pasilac N50 | APV Pasilac Tipo 1070K |
| APV Q030E | APV Q055E | APV Q080E | APV R5 | APV Pasilac M60 | APV Pasilac K55 Clip | APV Pasilac Tipo 1025 | APV Pasilac N35 (Tipo 1056) |
| APV J060 | APV J092 | APV J107 | APV J185 | APV B063S | APV B110 | APV B134 | APV Pasilac M107 (Tipo 1736 |
| APV B158 | APV B205S | APV B205L | |||||
Replacement plates and gaskets for APV
BES manufactures replacement plates and gaskets for APV gasketed plate heat exchangers, covering the plate models listed below — same chevron angle, corrugation depth, port geometry and overall plate dimensions, so our plates drop into the original APV frame without modification. Gasket compounds are available in NBR, EPDM, HNBR and Viton, and plate materials run from SS304 / SS316L to titanium and Hastelloy C-276 — the full material selection tables are on our replacement plates & gaskets page.
| APV model | Chevron angle | Corrugation depth (mm) |
Port diameter (mm) |
Port centre distance (mm) |
Overall plate size (mm) |
|---|---|---|---|---|---|
| H12 | H/V 120° | 3 | φ74 | 620 × 150 | 738 × 266 |
| H17 | H/V 120° | 3 | φ74 | 800 × 150 | 920 × 271 |
| H12 (fresh-water generator) | H 120° | 3 | φ74 | 620 × 150 | 740 × 271 |
| N25 | H/V 120° | 2.8 | φ85 | 793.4 × 238 | 930 × 373 |
| N35 | H/V 120° | 2.8 | φ85 | 1069 × 238 | 1202 × 371 |
| SR2 | 46° / 90° | 2.6 | φ63.5 | 700 × 180 | 838 × 298 |
| R5 | 120° | 5.4 | φ101.4 | 1397 × 257 | 1556 × 420 |
| SR6GL | 80° / 180° | 3.8 | φ102 | 1256 × 314 | 1418 × 476 |
| TR9GN | 90° / 180° | 3 | φ200 | 1465 × 409 | 1727 × 670 |
| TR9GL | 90° / 180° | 3 | φ200 | 1033 × 409 | 1295 × 670 |
| SR9 | 50° / 180° | 5.3 | φ200 | 1472 × 372 | 1745 × 645 |
| J060 | 60° / 120° | 3 | φ229 | 915 × 465 | 1192 × 746 |
| J092 | 60° / 120° | 3 | φ229 | 1290 × 465 | 1567 × 746 |
| J107 | 60° / 120° | 3 | φ229 | 1477.5 × 465 | 1755 × 746 |
| J154 | 60° / 120° | 3 | φ229 | 2040 × 465 | 2317 × 746 |
| J185 | 60° / 120° | 3 | φ229 | 2415 × 465 | 2692 × 746 |
| Q030E | 60° / 120° | 3 | φ114 | 743 × 310 | 920 × 496 |
| Q030D | 121° / 61° | 4.2 | φ112 | 743 × 310 | 920 × 492 |
| Q055E | 120° / 60° | 3 | φ114 | 1238 × 310 | 1415 × 496 |
| Q055D | 121° / 61° | 4.2 | φ112 | 1238 × 310 | 1415 × 492 |
| Q080D | 121° / 61° | 4.2 | φ112 | 1757 × 310 | 1934 × 492 |
| Q080E | 120° | 3 | φ114 | 1757 × 310 | 1934 × 496 |
| A055 | 50° / 120° | 3.2 | φ150 | 1057 × 380 | 1271 × 595 |
| A085 | 50° / 120° | 3.2 | φ150 | 1531 × 380 | 1745 × 595 |
| B063 | 60° / 123° | 3.2 | φ300 | 1043 × 486 | 1414 × 854 |
| B110 | 60° / 123° | 3.2 | φ300 | 1523 × 486 | 1894 × 854 |
| B134 | 60° / 123° | 3.2 | φ300 | 1763 × 486 | 2134 × 854 |
| B158 | 60° / 123° | 3.2 | φ300 | 2003 × 486 | 2374 × 854 |
| B205 | 60° / 123° | 3.2 | φ300 | 2483 × 486 | 2854 × 854 |
| K34 | H 122° / V 120° | 4 | φ115 | 832.5 × 310 | 1010 × 487 |
| K55 | H 122° / V 120° | 4 | φ115 | 1237.5 × 310 | 1415 × 487 |
| K71 | H 122° / V 120° | 4 | φ115 | 1552.5 × 310 | 1730 × 487 |
Plate dimensions follow the original APV model designations; dimensions in millimetres. H and V denote the horizontal and vertical pass where the two chevron angles differ. H12 (fresh-water generator) is the desalination variant of the H12 plate and differs in corrugation pitch and overall height.
Other APV models already in our mould range, with parameters available on request: SR6GH, C063, C110, C134, C158, C205, L039, L080D, L080E, Z155, Z195, Z235, the semi-welded versions of B063, B110, B134, B158 and B205, the ES and DF variants J060ES, J092ES, J107ES, J154ES, J185ES, L039ES, L039DF, L080ES and L080DF, plus O030, O050, CZ450A, CZ450B, CZ450, M060, M092 and M107. Models not listed here are being added to our mould range as tooling is completed — contact us for the latest availability.
Send the model from your nameplate
Send us the APV model and the plate count from your nameplate — or a photo of it — and we confirm the matching plates and gaskets, materials and price within one working day.
BES Heat Exchangers is an independent manufacturer. APV and SPX are trademarks of SPX FLOW, Inc.; all cross references are for model-comparison purposes only.




