Plate and Shell Heat Exchanger

Model Number	Plate and Shell Heat Exchanger
Structure	Plate Heat Exchanger
Liquid Flow Rate	0.5m/s
Maximum Working Pressure	2.0 Mpa
Plate Thickness	0.5mm, 0.6mm, 0.7mm, 0.8mm, 1mm
Plate Material	SS304, 316L,Titanium, AlloyC276, Nickel, 254SMO, C2000
Plate Theta	Low theta and high theta
Plate Hole	0 hole, 1 hole, 2 holes, 3 holes, 4holes
Gasket Material	NBR, HNBR, EPDM, Vitom
Gasket Type	Without glued, glued
Unit Type	Gasket plate heat exchanger unit
They can replace and mix with original plate

bespheadmin2023-11-27T05:32:44+00:00